Plant of palm oil extraction
1. Sterilizing :
In general, fresh fruit bunches should be sent into palm oil extraction plant in 24 hours after harvest to prevent palm oil acid value increase caused by fatty enzymes. Palm bunches sterilizing also inactivate fatty enzyme with high temperature to prevent enzyme break palm oil chemical structure.
In general, fresh fruit bunches should be sent into palm oil extraction plant in 24 hours after harvest to prevent palm oil acid value increase caused by fatty enzymes. Palm bunches sterilizing also inactivate fatty enzyme with high temperature to prevent enzyme break palm oil chemical structure.
2.Threshing :
The palm fruit proportion is about 60% of the FFB. In this section, we always use rotating drum thresher to separate palm fruit from the bunches.
The palm fruit proportion is about 60% of the FFB. In this section, we always use rotating drum thresher to separate palm fruit from the bunches.
3. Crushing :
The purpose of crushing is to destroy palm skin, separate the palm pulp and nuts, pound palm pulp and to damage the cell structure of palm pulp by heating at the same time, which avail the latter pressing section.
The purpose of crushing is to destroy palm skin, separate the palm pulp and nuts, pound palm pulp and to damage the cell structure of palm pulp by heating at the same time, which avail the latter pressing section.
4.Pressing :
In palm oil extraction plant, palm oil screw press is common equipment we use, the output of which is mixture of water, oil &residue and press cake (fiber cake).
In palm oil extraction plant, palm oil screw press is common equipment we use, the output of which is mixture of water, oil &residue and press cake (fiber cake).
5.Subsidence and filtration :
Separate the fiber from the mixture derived from pressing by subsidence and filtration, after continuous subsidence we can separate oil and precipitate. With another filtration and vacuum drying, the oil is just crude palm oil as we say.
Separate the fiber from the mixture derived from pressing by subsidence and filtration, after continuous subsidence we can separate oil and precipitate. With another filtration and vacuum drying, the oil is just crude palm oil as we say.
Henan Huatai oil processing equipment sold in more than 30 provinces and cities in China and exported to the United States, Sweden, Japan, Korea, Bolivia, Sudan, Kazakhstan, Tajikistan, Russia, Malaysia, Indonesia, Bangladesh, Myanmar, Vietnam, Thailand, Rwanda, Nigeria, more than 130 countries and regions.Henan Huatai Cereals And Oils Machinery Co.,Ltd constants on the goal of Chinese leading food and oil machinery engineer, leading on advancement of oil industry. We are ready to meet all challenge and opportunities with full confidence and energy.Huatai machineryhas developed into a large-scale oil machinery manufacturing base in China.
if you need any palm oil machine, different capacity the cost is different, our engineer will give you the best solution according your capacity and need, email to molly@oilmachineworld.com
www.palmoilmachine.com
www.huataioilmachine.com
没有评论:
发表评论