Edible oil refining steps, oil refinery plant, bleaching, deodorization, degumming,

Crude oil dugumming in this step gums in crude oil are removed by hydration with the help of phosphoric acid. Neutralization, in this step, free fatty acids are neutralized by using sodium hydroxide and covert them into soap, additional impurities are also removed by adsorption on the soap. bleaching, during bleaching, unwanted pigments are absorbed physically and oil will become much clear. deodorization, is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure. dewaxing,some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed,the oil will freeze under low temperature, thus affecting oil quality and appearance so this process is necessary for extremely cold areas.

 Huatai company supply differeent kinds of oilseeds oil refining with any capacity, if you want the refining plant please email to info01@cnoilmachine.com

www.palmoilmachine.com

www.oilmachineryplant.com

Small Cooking Oil Sunflower Oil Peanut Oil Refining Unit

 Small Cooking Oil Sunflower Oil Peanut Oil Refining Unit

Brief introduction:
After preheating, add a certain amount of hot water in the crude oil for degumming. Then add a certain amount of alkali liquor in the degummed oil for alkali refining reaction, and centrifuge out soap stock and oil. After removing soapstock out, the oil begin water washing, centrifuging, and vacuum drying by heating. After dehydration, oil go into the bleaching pot for bleaching, and fitering clay or active carbon. Then after heat exchanger, the decolored oil enters into the deodorization pot. After deodorization, fitering and cooling, the oil enters into the finished oil tank.
1.Degumming Section: Some impurity, such as Phospholipid, gum, and protein, can be dissolved  into oil when there is no water, but once there is water in oil, these impurity can be dissolved into water. So, in degumming section, we use the hot water to wash crude oil for two-three times to remove these impurity.
2.Neutralizing Section: Crude oil contains much free fatty acid, which is harmful for health. Free fatty acid can have the reaction with caustic soda, during the reaction, it can be saponified and becomes soapstock, then small soapstock pellets will sink and  becomes sediment and be pumped out. After neutralizing, most of the free fatty acid will be removed out.
3.Decoloriztion Section: Most of the crude oil has deep color because of the pigments, such as carotene, xanthophyll, etc. We use bleaching earth to remove pigments, because bleaching earth has strong adsorption capacity. Then pump oil into plate filter to  remove bleaching earth, then pigment also will be removed out along with bleaching earth, then oil will be clean and transparent.
4. Deodorizing Section: Pure oil has no smell, but different crude oil has their special smell because of some volatile matters, for example the oxide for ketones, aldehydes, hydrocarbons. In deodorizing section, we deliver steam into oil continuously, and make  sure steam and oil can fully contacted under high temperature and pressure, then volatile matters can be removed out along with the steam.
Henan Huatai company supply different capacity crude edible oil reifning machine equipment, any need please email to info01@cnoilmachine.com

Edible oil solvent extraction machine made by Henan Huatai Cereals and Oils Machinery Co.,Ltd

 Edible oil solvent extraction machine

1.Main uses and features:vegetable oil solvent extraction equipment is a continuous oil production equipment.it is to use of selected organic solvents can be purchased to dissolve the role of oils and fats,by soaking and spraying,extract oil or grease in the cake efficiently.vegetable oil extraction equipment can be used for the leaching of all the oil crops (as peanuts, cottonseed, rapeseed and sesame and so on) and all pre pressing cake,it can also be used in some oil crops (such as soybeans) for a one-time leaching. The main advantages of the solvent extraction of the edible oil:1)oil extraction rate is high.the residual oil in the cake is below 1%;
2. The soybean meal by once leaching,because the producing process temperature is low,the protein content is high,the soybean meal is in high quality.and use value is high, can be widely used as food raw material.
The advantages of vegetable oil solvent extraction equipment are as follows:
The processing of vegetable oil solvent extraction cost is low, the oil rate is high, the labor efficiency is high, the labor intensity is low,vegetable oil solvent extraction equipment is safe and reliable, the operation and maintenance is convenient, the environment sanitation condition is good and so on. Henan Huatai supply palm oil machine, edible oil machine, oilseeds press machine, oil extraction，Any edible oil machine need, please email to

 info01@cnoilmachine.com

What machine can help us extract oil from rice bran?

What machine can help us extract oil from rice bran?
To extract oil from rice bran usually use puffing+solvent extraction technology. Firstly, you need four kinds of rice bran pretreatment machines, and then you need set up a complete rice bran oil solvent extraction plant. If you want gain refined rice bran oil, you also need rice bran oil refinery machine and dewaxing machine.
If you want to start rice bran oil production business, welcome to contact us! Henan Huatai will provide you high quality rice bran oil processing machine and best serves. any need please email to info01@cnoilmachine.com

 

Making soybean oil, how to improve the soybean oil yield？

Oilseeds are one of the most common sources of edible vegetable oils and fats. The process of obtaining oil from them consists in preparing the seed and then extracting the oil (by means of solvent extraction or crushing). After that, the crude oil obtained is refined; these stages are degumming, deacidification, bleaching, and finally deodorizing. 
Making soybean oil, how to improve the soybean oil yield is concerned by every producer. It is also one of the key factors that affects the sales volume of soybean oil press manufacturers. First, intensively sorting the soybean, this is the basic factor to ensure the oil yield of soybean and even soybean oil quality.Secondly, take every detail into consideration for the pretreatment of soybean.Thirdly, in soybean steam frying process, pay attention to the control of the furnace.Fourthly, choose high quality soybean oil press equipment. Any need please email to info01@cnoilmachine.com

 

Sesame Oil Presser Working Principle

The screw oil press mainly uses the change of pressing screw pitch size and screw thread depth to reduce the volume between screw pitch and pressing chamber, the oil materials get stronger pressure gradually, thus the oil can be squeezed out of the oil materials. Meanwhile, the high pressure in the chamber and the strong friction generates high temperature, which can improve the oil yield.
The temperature of oil manufacture room should keep between 15℃ to 20℃. If the temperature is too low, it will affect the oil yield and oil quality.
Before pressing, the oil materials’ moisture content should be appropriate: peanuts with 8%—11%, soybeans with 5%—8%, cotton seeds with 4%—6%, rapeseeds with 6%—8%.
After running for three to four months, the screw oil press needs a maintenance. Lubricate the machine parts with machine oil at regular intervals.
Huatai company supply different kinds of oilseeds press, oil expeller machine, oilseeds processing line, soybean oil processing, sesame oil press, peanut oil press, sunflower seeds oil press and so on, any need please email to info01@cnoilmachine.com